Resource library
77 articles filtered from the Alliance Chemical Resource Library. Clear filter
Yes, 3% hydrogen peroxide removes blood stains from white and colorfast fabrics. Rinse the stain with cold water first, because hot water cooks the protein into the fibers. Then apply a few...
Use distilled water in a humidifier, especially an ultrasonic or impeller (cool-mist) model. The US EPA says to use low-mineral water such as distilled; it rates deionization and reverse osmosis as removing...
Lead-acid batteries die in winter for two reasons: cold cuts the capacity they can deliver, and a partly discharged battery can freeze. Trojan Battery rates a deep-cycle battery at about 50% of...
Bioreactor CIP chemistry is the use of sodium hydroxide (NaOH) and nitric or phosphoric acid in a five-stage clean-in-place cycle for precision fermentation equipment. The process runs a pre-rinse, a caustic wash...
Phosphoric acid (H₃PO₄, CAS 7664-38-2) is a colorless, odorless inorganic acid and the third-largest-volume mineral acid in the world. It is a triprotic acid (three acidic protons, pKa 2.15 / 7.20 /...
Concentrated vinegar is a water solution of acetic acid (CH₃COOH, CAS 64-19-7) at a strength higher than the 5% you buy in a grocery store. "X% vinegar" simply means X% acetic acid...
Toluene (methylbenzene, C₇H₈, CAS 108-88-3) is an aromatic hydrocarbon solvent with a research octane number of 121 and a Kauri-Butanol value of 105. It is the highest-impact octane booster permitted in unrestricted...
Soda ash is sodium carbonate, a white, odorless powder with the chemical formula Na₂CO₃ and CAS number 497-19-8. It has a strongly alkaline pH of about 11.4 in a 1% solution (11.37...
Hydrogen peroxide (H2O2, CAS 7722-84-1) is an oxidising agent sold in a ladder of concentrations, not a single product. Alliance Chemical stocks eight strengths — 3%, 5%, 6%, 10%, 12%, 15%, 25%...
Shocking a pool without chlorine involves using hydrogen peroxide (H₂O₂), a chlorine-free oxidizer that breaks down into water and oxygen without forming chloramines or trihalomethanes. For pool treatment, the industry-standard concentration is...
Odorless mineral spirits remove ~99% of aromatic hydrocarbons for indoor use — cabinet shops, gun cleaning, fine art, electronics. Full buyer’s guide, safety specs, and when to choose it over regular Stoddard...
Step-by-step guide to acid etching and stone washing a knife at home with ferric chloride. Covers dilution ratios, Damascus pattern reveals, folding-knife masking, stone washing technique, and safe disposal.
Sodium thiosulfate is an inorganic crystalline solid with the formula Na₂S₂O₃, most commonly supplied as the pentahydrate Na₂S₂O₃·5H₂O (molar mass 248.18 g/mol, CAS 10102-17-7). It is a colorless-to-white, odorless salt with near-neutral...
Petroleum ether is a narrow-cut mixture of light aliphatic hydrocarbons—mainly pentanes, hexanes, and heptanes—distilled from crude oil and defined by boiling range, not by a single molecular formula. It is identified by...
Cleaning solar panels, connectors, and cable terminations involves the use of Deionized Water (CAS 7732-18-5), Isopropyl Alcohol (CAS 67-63-0), and Acetone (CAS 67-64-1). Deionized Water, with a boiling point of 100°C (212°F),...
Copper patina is a layer of corrosion products that forms on copper surfaces when exposed to specific chemicals, producing green, blue, brown, or black finishes depending on the compound created. Green patina...
A chemical compatibility chart is a reference tool that indicates whether different chemical classes can be safely stored, handled, or mixed together without hazardous reactions. The chart uses a matrix to show...
Sulfuric acid spill neutralization is the process of safely converting hazardous sulfuric acid (H₂SO₄), the world’s most widely produced industrial chemical, into less harmful sulfate salts and water using appropriate neutralizing agents....
Alliance Chemical · Taylor, Texas · since 1998
Order any size online with no minimum; it ships in 1–2 business days. For multi-drum, tote or recurring supply, ask for a quote with freight and net-30 terms.
55,000+ customersUPS Ground for parcelsLTL freight for drums & totes
Quick and easy COA request for your Alliance Chemical products
Request Submitted Successfully!
We'll email your Certificate(s) of Analysis within 1-2 business days.
Find and download the SDS for your products.
