Resource library
22 articles filtered from the Alliance Chemical Resource Library. Clear filter
Ethyl acetate (ethyl ethanoate, EtOAc) is an ester solvent with the molecular formula C₄H₈O₂, written CH₃COOC₂H₅, a molar mass (molecular weight) of 88.11 g/mol and CAS number 141-78-6. It boils at 77.1...
Use this practical chemical safety audit checklist to walk your plant, lab or warehouse, verify storage and labeling, review PPE and SDSs, and close gaps before customer or regulatory inspections.
After 20+ years supplying Ammonium Hydroxide to research labs, government facilities, and manufacturers, we've learned one critical lesson: the product is only as reliable as the supplier behind it.Not every application needs...
Dive deep into one of the industry's most versatile chemicals with our definitive guide to Phosphoric Acid. Andre Taki, Chief Commercial Officer, explains the critical differences between technical, food, and ACS grades,...
Most chemical incidents don't happen during use—they happen during storage. A single mistake in segregation or handling is a disaster waiting to happen. This is our definitive guide, built on decades of...
Unlock the full potential of concentrated vinegar with our ultimate guide and interactive calculator. Stop guessing and start mixing with precision for any task—from all-purpose cleaning to potent weed killing. This comprehensive...
Sulfuric acid is a dense, oily, clear liquid with the formula H2SO4, a boiling point of 337°C at 93% concentration, and a melting point of 10°C. It reacts aggressively with organic materials...
Toluene (methylbenzene, toluol; CAS 108-88-3) is an aromatic hydrocarbon solvent with the formula C₇H₈ (C₆H₅CH₃): a clear, colorless liquid with a sweet, pungent odor that boils at 110.6 °C (231 °F) and...
Trichloroethylene (TCE) is a halocarbon industrial solvent consisting of a two-carbon chain with three chlorine atoms attached. Its dense, non-flammable liquid structure gives it aggressive solvency for heavy greases, oils, and waxes,...
Safe storage of acids, bases, and solvents is the practice of organizing and maintaining these chemicals to prevent dangerous reactions, toxic fumes, spills, fires, injuries, and environmental damage. Acids are corrosive and...
Chemical storage guidelines are documented protocols for safely handling and storing acids, bases, solvents, and other hazardous chemicals in industrial settings. Proper storage prevents fires, explosions, and toxic releases by requiring segregation...
Acetic acid is a colorless organic compound with the chemical formula CH₃COOH and a molecular weight of approximately 60.05 g/mol. It is miscible with water, alcohol, and many organic solvents, and has...
TSP cleaner is trisodium phosphate (Na₃PO₄, CAS 7601-54-9), a white, water-soluble, strongly alkaline sodium salt, usually sold as the dodecahydrate Na₃PO₄·12H₂O (CAS 10101-89-0). A 1% solution measures about pH 11.9, which is...
Ferric Chloride is a compound of iron and chlorine (FeCl₃, CAS 7705-08-0) where iron is in the +3 oxidation state. Typically supplied as a 40% aqueous solution, it is a corrosive, brownish-orange...
Hydrochloric acid is a strong, clear, often colorless solution formed when hydrogen chloride gas dissolves in water, with the chemical formula HCl. It is commonly known as "muriatic acid" and is widely...
Hydrogen Peroxide is a powerful oxidizing chemical with the formula H₂O₂ and CAS number 7722-84-1. It decomposes into water and oxygen, releasing energy and highly reactive hydroxyl radicals. Used in concentrations from...
Toluene is a monosubstituted aromatic hydrocarbon (C₇H₈, CAS 108-88-3) widely used as an industrial solvent for paint thinning in coatings, adhesives, and chemical manufacturing. It has a Kauri-Butanol value of approximately 105,...
Hydrochloric acid is a highly corrosive, strong mineral acid with the chemical formula HCl and CAS number 7647-01-0. It is widely used in industrial, commercial, and laboratory settings for applications such as...
Alliance Chemical · Taylor, Texas · since 1998
Order any size online with no minimum; it ships in 1–2 business days. For multi-drum, tote or recurring supply, ask for a quote with freight and net-30 terms.
55,000+ customersUPS Ground for parcelsLTL freight for drums & totes
Quick and easy COA request for your Alliance Chemical products
Request Submitted Successfully!
We'll email your Certificate(s) of Analysis within 1-2 business days.
Find and download the SDS for your products.
