Resource library
29 articles filtered from the Alliance Chemical Resource Library. Clear filter
Ammonium hydroxide (formula NH₄OH, also written NH₃(aq) or NH₃·H₂O; CAS 1336-21-6) is ammonia gas dissolved in water, also sold as aqueous ammonia, aqua ammonia or ammonia water. It is a weak base...
Naphtha (commonly misspelled "naptha") is a flammable petroleum fraction that boils between roughly 122°F and 400°F (50-204°C); refineries blend it into gasoline, crack it into ethylene and propylene, and refine part of...
Acid cleaning of copper coils and heat exchangers is an industrial process that removes mineral scale and corrosion byproducts using acids such as phosphoric acid (CAS 7664-38-2, boiling point 213°C), citric acid...
How vinyl (PVC) is made, from salt and the chlor-alkali process through vinyl chloride monomer to resin, and the industrial chemicals each stage depends on: sodium hydroxide, hydrochloric acid and sulfuric acid....
Choosing the right solvent for an oil rig isn't just about cleaning—it's about safety, compliance, and uptime. This definitive guide, prompted by a call from a major operator, puts two titans head-to-head:...
In any high-performance industry, the final product is only as good as its foundation. A flawless coating, a perfect weld, or a reliable circuit board all depend on one critical, often overlooked...
Every winemaker battles two things: stubborn, caked-on grime and unbalanced, overly acidic must. What if one economical product could solve both? This expert guide dives deep into Soda Ash (Sodium Carbonate), a...
Toluene (methylbenzene, toluol; CAS 108-88-3) is an aromatic hydrocarbon solvent with the formula C₇H₈ (C₆H₅CH₃): a clear, colorless liquid with a sweet, pungent odor that boils at 110.6 °C (231 °F) and...
Concentrated acetic acid is a potent solution of acetic acid (chemical formula CH₃COOH) in water, available from Alliance Chemical in strengths of 10%, 30%, 50%, and 75%. It is a colorless liquid...
Trichloroethylene (TCE) is a halocarbon industrial solvent consisting of a two-carbon chain with three chlorine atoms attached. Its dense, non-flammable liquid structure gives it aggressive solvency for heavy greases, oils, and waxes,...
An industrial cleaning solvent is a liquid formulated to dissolve, suspend, or extract other materials without undergoing chemical change itself. Key properties include solvency power (often measured by Kauri-Butanol value), evaporation rate,...
Correction, October 6, 2026. This article was written in April 2025. Its statements that the rule’s effective date or enforcement is “stayed” are out of date.
D-Limonene is a monocyclic monoterpene solvent (CAS 5989-27-5) extracted from citrus fruit rinds during commercial juice production, with a typical purity of 90–97%. Food-grade D-Limonene is specifically distilled to remove impurities and...
Sulfuric acid 93% is a strong industrial acid (H₂SO₄) used by professional cleaners and maintenance teams for removing stubborn stains from concrete surfaces such as driveways, garages, parking lots, sidewalks, and industrial...
Optimize your brewery operations with industrial-grade CIP chemicals to eliminate beerstone and ensure consistent flavor profiles.
Isopropyl alcohol (IPA) is a versatile solvent with the chemical formula C3H8O and CAS number 67-63-0, available in concentrations such as 70%, 91%, and 99%. The 70% solution contains 30% water, which...
D-Limonene: The Future of Industrial DegreasingExplore how D-Limonene, a citrus-based solvent, is revolutionizing industrial degreasing in aerospace and automotive maintenance. Discover its eco-friendly advantages over traditional solvents like TCE, including lower toxicity,...
Industrial solvents are chemical compounds used to dissolve, dilute, or disperse other substances without chemically altering them. They are classified into four main categories: hydrocarbon, oxygenated, halogenated, and terpene or bio-based solvents,...
Alliance Chemical · Taylor, Texas · since 1998
Order any size online with no minimum; it ships in 1–2 business days. For multi-drum, tote or recurring supply, ask for a quote with freight and net-30 terms.
55,000+ customersUPS Ground for parcelsLTL freight for drums & totes
Quick and easy COA request for your Alliance Chemical products
Request Submitted Successfully!
We'll email your Certificate(s) of Analysis within 1-2 business days.
Find and download the SDS for your products.
