Resource library
16 articles filtered from the Alliance Chemical Resource Library. Clear filter
Hydrofluorosilicic acid (HFS, H2SiF6, CAS 16961-83-4) is a corrosive, ~23% aqueous fluorine acid recovered as a byproduct of phosphate-fertilizer manufacturing. About 63% of U.S. supply goes to municipal water fluoridation, but it...
Stainless steel passivation is a chemical process that removes surface contaminants and promotes the formation of a stable chromium oxide layer (Cr₂O₃) to protect against corrosion. It matters most in medical device,...
Stainless steel isn't inherently stainless—it requires a critical chemical treatment to achieve maximum corrosion resistance. This is the definitive guide to nitric acid passivation, the industry-standard process for creating a robust, passive...
Dive deep into one of the industry's most versatile chemicals with our definitive guide to Phosphoric Acid. Andre Taki, Chief Commercial Officer, explains the critical differences between technical, food, and ACS grades,...
The perfect shine, the corrosion-proof layer, the flawless paint adhesion—it's not magic, it's chemistry. This is our definitive guide to the essential chemicals and processes that transform raw metal into high-performance industrial...
In any high-performance industry, the final product is only as good as its foundation. A flawless coating, a perfect weld, or a reliable circuit board all depend on one critical, often overlooked...
Essential acids and bases in modern metal finishing and electroplating are chemical agents such as Nitric Acid (HNO₃), Sulfuric Acid (H₂SO₄), Hydrochloric Acid (HCl), and Ammonium Hydroxide (Aqua Ammonia), each serving critical...
Trichloroethylene (TCE) is a halocarbon industrial solvent consisting of a two-carbon chain with three chlorine atoms attached. Its dense, non-flammable liquid structure gives it aggressive solvency for heavy greases, oils, and waxes,...
Sodium hydroxide (NaOH), also known as caustic soda or lye, is a highly caustic inorganic compound with the formula NaOH, consisting of sodium cations (Na⁺) and hydroxide anions (OH⁻). It is widely...
An industrial cleaning solvent is a liquid formulated to dissolve, suspend, or extract other materials without undergoing chemical change itself. Key properties include solvency power (often measured by Kauri-Butanol value), evaporation rate,...
Correction, October 6, 2026. This article was written in April 2025. Its statements that the rule’s effective date or enforcement is “stayed” are out of date.
Ferric chloride is a metal-etching chemical with the formula FeCl3, commonly used to create relic finishes on guitar hardware. It is a salt rather than an acid, although its water solution is...
Ferric Chloride is a compound of iron and chlorine (FeCl₃, CAS 7705-08-0) where iron is in the +3 oxidation state. Typically supplied as a 40% aqueous solution, it is a corrosive, brownish-orange...
Nitric acid is a highly corrosive, strongly oxidizing mineral acid with the chemical formula HNO3 and CAS number 7697-37-2. It is a colorless to pale yellow liquid, miscible with water and most...
Phosphoric acid is a weak triprotic mineral acid with the chemical formula H₃PO₄. It is typically handled as a 75% or 85% aqueous solution and is non-volatile, with a first dissociation pKa...
Verdigris -- the luminous blue-green patina on aged copper -- stands as one of chemistry's most beautiful intersections with art. For over 2,000 years, artisans have used acetic acid to transform ordinary...
Alliance Chemical · Taylor, Texas · since 1998
Order any size online with no minimum; it ships in 1–2 business days. For multi-drum, tote or recurring supply, ask for a quote with freight and net-30 terms.
55,000+ customersUPS Ground for parcelsLTL freight for drums & totes
Quick and easy COA request for your Alliance Chemical products
Request Submitted Successfully!
We'll email your Certificate(s) of Analysis within 1-2 business days.
Find and download the SDS for your products.
