Product Overview
VM&P Naphtha — Varnish Makers and Painters Naphtha — is a fast-evaporating, light petroleum distillate commonly used as a solvent and thinner in commercial paint, coating, and adhesive formulations. Because this product is a complex mixture of refined hydrocarbons, its molecular weight, chemical formula, and CAS registry number are not applicable as single values. Alliance Chemical distributes this highly refined solvent to meet the rigorous demands of industrial coating applications, ensuring consistent evaporation rates, low residue, and high solvency power. This hydrocarbon fluid acts as a direct diluent for oil-based paints, varnishes, and lacquers, providing excellent viscosity reduction without degrading the polymeric binder structure of the coating.
Our supply chain ensures that each batch of VM&P Naphtha is processed to eliminate heavy ends, minimizing the presence of slow-evaporating components that could compromise drying times. This clean-burning, rapid-drying solvent is highly favored in manufacturing environments where production throughput is tied directly to solvent evaporation rates. By sourcing your raw materials through Alliance Chemical, you gain access to a reliable, consistent chemical supply that helps maintain predictable cycle times in automated painting and metal finishing operations. This fluid is also useful for surface preparation, removing light oils and greases before the application of protective coatings.
Why This Grade
Since VM&P Naphtha is a multi-component petroleum hydrocarbon mixture, traditional chemical grades and individual purity concentrations are not applicable. Instead, its performance is defined by its narrow boiling range and distillation curve, which dictate the specific evaporation window required for professional varnishing and paint applications. Standard mineral spirits or heavier distillates evaporate too slowly, leading to sagging, runs, and prolonged tackiness in applied coatings. Conversely, lighter petroleum solvents may evaporate too quickly, causing surface blushing, poor leveling, or dry spray defects. Selecting this precise VM&P Naphtha distillation range ensures the optimal balance between wet-edge time and rapid cure times.
Using an incorrect solvent grade or an unrefined hydrocarbon mixture introduces unpredictable heavy-fraction residues that can remain trapped under the dry paint film. This failure mode leads to film wrinkling, loss of adhesion, and eventual coating delamination over time. Industrial painters and coating manufacturers rely on the standardized physical properties of our VM&P Naphtha to prevent these costly quality control issues. By maintaining consistent solvency and volatility profiles, Alliance Chemical helps commercial operations avoid the material waste and rework associated with out-of-specification thinning agents.
Chemical Profile
- UN Number
- UN1268
- Hazard Class
- Class 3
- Packing Group
- II
- Proper Shipping Name
- Petroleum distillates, n.o.s. (VM&P naphtha)
- GHS Signal Word
- Warning
- GHS Pictograms
- Flammable
Values sourced from Alliance Chemical's canonical chemistry registry. Certificate of Analysis (COA) per lot.
Industrial Applications
- Thinning oil-based varnishes, paints, and enamels to achieve the optimal spray viscosity for uniform industrial coating applications.
- Formulating specialized industrial adhesives and sealants that require a fast-evaporating hydrocarbon solvent to initiate rapid bonding times.
- Preparing metal surfaces by removing manufacturing oils, drawing lubricants, and protective greases prior to priming or powder coating operations.
- Diluting specialized printing inks and gravure ink formulations to manage viscosity and drying profiles on high-speed commercial presses.
- Serving as a carrier solvent in wood staining and finishing products to facilitate deep penetration of resins and pigments.
Hazmat & Shipping
VM&P Naphtha is classified as a hazardous material for transportation and is strictly regulated under national and international shipping codes. According to the DOT regulations, this material must be shipped under the identifier UN1268, classified under Hazard Class 3, and assigned to Packing Group II. The proper shipping name is verbatim Petroleum distillates, n.o.s. (VM&P naphtha). The designated signal word for this chemical is Warning, and it carries the GHS pictogram Flammable on all compliant packaging. This designation reflects the product's hazard statement H226 Flammable liquid and vapor, indicating that the substance has a relatively low flashpoint and must be handled with utmost care to prevent ignition.
Safe handling of this regulated hydrocarbon requires strict adherence to safety protocols and the deployment of appropriate personal protective equipment (PPE). Operators must wear chemical-resistant protective gloves and eye protection in accordance with the precautionary statement P280 Wear protective gloves and eye protection. to prevent dermal contact and ocular exposure during transferring and mixing. It is critical to enforce the precautionary statement P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. in all handling areas. Grounding and bonding of all drums, pails, and transferring equipment are mandatory to prevent static discharge from igniting the flammable vapors.
Handling & Storage
Proper storage is vital to preserving the quality of VM&P Naphtha and maintaining site safety. Store this volatile solvent in a cool, well-ventilated location, ideally within a temperature-controlled flammables cabinet or dedicated storage room kept between 50°F and 85°F (10°C to 29°C). Containers must remain tightly sealed when not in use, following precautionary statement P233 Keep container tightly closed., to prevent vapor loss and atmospheric contamination. VM&P Naphtha is compatible with carbon steel, stainless steel, and high-density polyethylene (HDPE) containers, but it will degrade many common rubbers and low-grade plastics. Keep this product strictly segregated from strong oxidizing agents, such as peroxides, nitric acid, and chlorine, to prevent dangerous exothermic reactions.
Order & Documentation
Alliance Chemical provides comprehensive logistics support and technical documentation for all our commercial chemical clients. A detailed Safety Data Sheet (SDS) is provided with every order to ensure your facility maintains full OSHA compliance, and a Certificate of Analysis (COA) is available upon request to verify the physical properties of each batch. We offer flexible packaging configurations, ranging from handy 1-quart containers to bulk 5-gallon pails, to suit your specific production scale. To secure your supply or discuss volume pricing, please Request a Quote today, or you can directly Download the SDS for your safety records. Explore our complete range of Hydrocarbons to find matching solvent solutions.
Why Buy from Alliance Chemical
Since 1997, Alliance Chemical has supplied premium industrial chemicals from Taylor, Texas under CAGE Code 1LT50, with a COA and SDS included on every order. For industrial use only.
