Sodium Hypochlorite 6% Technical Grade

Name: Quick Facts: Sodium Hypochlorite 6%
Creator: Alliance Chemical
License: https://alliancechemical.com/policies/terms-of-service

Sodium Hypochlorite

Also known as: chlorine bleach · sodium oxychloride
CAS number: 7681-52-9
Formula: NaOCl
Molecular weight: 74.44 g/mol
Concentration: 6%
Grade: Technical Grade
Appearance: Yellow-green liquid with strong chlorine odor
Boiling point: 101°C (dilute)

How it is classified for shipping

UN number: UN1791
Hazard class: 8 Corrosive
Packing group: III

Proper shipping name Hypochlorite solutions

Hazards

Signal word Danger

Corrosive
Environmental hazard

Summary only. Read the SDS and the container label for complete hazard and handling information.

SDS also in

Who uses it

Pool maintenance teams, Water treatment operators, Janitorial supply buyers, Facility maintenance departments

Water & Environmental

Representative industry photos.

Product quick facts

CAS 7681-52-9NaOClUN1791

Sodium Hypochlorite 6% (CAS 7681-52-9) is a 6% Technical Grade liquid with molecular formula NaOCl and a molecular weight of 74.44 g/mol, for industrial and manufacturing applications. It is also known as chlorine bleach and sodium oxychloride. It ships as DOT Hazard Class 8. Alliance Chemical supplies this product in 7 container sizes from 1 Quart to 330 Gallon (16 pack options) with 1-2 business day shipping from Taylor, TX on in-stock orders, plus SDS and lot-specific Certificate of Analysis.

Pack sizes 7 container sizes (1 Quart to 330 Gallon) · 16 pack options
Purity / spec 6% Technical Grade
Lead time In-stock orders placed by Mon-Thu 2 PM CT / Fri 12 PM CT typically ship within 1-2 business days.
Regional availability View state-by-state shipping pages

Request Bulk Quote (512) 365-6838

Stock footage.

How it ships.

Regulated products are packed, marked, and labeled for hazmat transport, from one quart to a pallet of drums.

Most stocked orders ship in 1–2 business daysOrder cutoff: Mon-Thu 2 PM CT / Fri 12 PM CT
Hazmat packing, marking, and labelingPacked by staff trained under DOT rule 49 CFR 172.704
UPS Ground for bottles, jugs, and up to three pailsLTL freight for four or more pails, drums, and totes. Liftgate on request.

Ships with
FedEx Freight
Southeastern Freight Lines

Buying for a company or agency?

Pay by card at the listed price, or order on Net 30 terms once your credit is approved. For NSN and contract requirements, send an RFQ.

CAGE code: 1LT50
UEI: DCTCZDY3BLD3
Primary NAICS: 424690
Ownership: Woman-Owned
Federal supply: DLA Supplier
Terms: Net 30 on approved credit, W-9 on request

Apply for Net 30 Email a purchase order Vendor qualification documents

Gloved hands strapping four blue chemical drums to a pallet at a warehouse loading dock — Illustration.

Safety data sheets and certificates.

Find an SDS or TDS by product name or CAS number. Certificates of analysis are free on request.

Find an SDS or COA

Selected organizations we've supplied

Logos identify supplied organizations; no endorsement or partnership is implied.

Description
Product Documents
Chemical Profile

Product Overview

Sodium Hypochlorite 6% is a pre-diluted aqueous solution of sodium hypochlorite (NaOCl) prepared with high-purity deionized water. This 6% concentration provides a convenient, ready-to-use form that eliminates the need for on-site dilution of concentrated stock. Appearance: Yellow-green liquid with strong chlorine odor. This Technical Grade product is manufactured for industrial and commercial applications where high purity is required for consistent performance.

Supplied by Alliance Chemical in sizes ranging from 1 quart to 330-gallon IBC totes, this solution is ideal for operations requiring consistent 6% strength with minimal handling risk compared to higher concentrations.

Key Properties

Chemical Name: Sodium Hypochlorite
Synonyms: Liquid Bleach, Chlorine Bleach, NaOCl
Chemical Formula: NaOCl
CAS Number: 7681-52-9
Molecular Weight: 74.44 g/mol
Concentration: 6% (w/w)
Grade: Technical
Specific Gravity (20°C): 1.090
Boiling Point: 101°C (dilute)
Flash Point: N/A
Appearance: Yellow-green liquid with strong chlorine odor
Solubility: Fully soluble in water

Common Applications

Water Treatment: Oxidizer dosed into municipal water, pool, and cooling-tower systems.
Surface Treatment: Oxidizing agent used on equipment and facility surfaces.
Wastewater Treatment: Used for oxidation of organic contaminants and cyanide destruction in effluent.
Laundry & Textile Bleaching: Effective whitening and stain removal agent for commercial and institutional laundry operations.
Food Processing: Used in produce-wash and CIP systems where an oxidizer is specified. Confirm suitability against your own process requirements.

Safety Precautions

Sodium Hypochlorite is an oxidizer and is corrosive to skin and eyes. Never mix with acids or ammonia — doing so releases toxic chlorine or chloramine gas. Handle in well-ventilated areas with appropriate PPE. Store in a cool, dark location in original HDPE containers.

PPE Requirements: Wear chemical-resistant gloves, splash goggles, and protective clothing. Avoid breathing vapors. In case of skin or eye contact, rinse immediately with large amounts of water for at least 15 minutes. Refer to the Safety Data Sheet (SDS) for detailed handling, storage, and emergency response procedures.

Shipping: UN 1791, Hypochlorite solution, Class 8, PG II/III.

Benefits

Ready-to-Use Strength: Pre-diluted to a known available-chlorine concentration, so no in-house dilution step is required.
Consistent Oxidizing Strength: Available-chlorine concentration verified per lot on the certificate of analysis.
Cost-Effective Supply: Available from small bottles to bulk totes for economical treatment operations.

Related Products

Related reading: Who Discovered Chlorine? The 1774 Green Gas That Became Sodium Hypochlorite — how sodium hypochlorite was discovered, what the concentrations mean, and how to pick one.

Frequently Asked Questions About Sodium Hypochlorite 6%

What is Sodium Hypochlorite 6% and what is its chemical formula?

Sodium Hypochlorite 6% is listed under CAS 7681-52-9 (PubChem reference search). The catalog formula is NaOCl. The listed molecular weight is 74.44 g/mol. For solutions and blends, identity values may describe a constituent; consult the product SDS for composition.

What are the physical properties of Sodium Hypochlorite 6%?

Catalog reference information for Sodium Hypochlorite 6%: form: Liquid; appearance: Yellow-green liquid with strong chlorine odor; melting point: -6°C; boiling point: 101°C (dilute); specific gravity: 1.09; solubility: Fully soluble in water; reference values may describe a pure substance rather than the supplied concentration or blend. Confirm applicable conditions and specifications in the product documents; these values are not batch test results.

What grade and purity of Sodium Hypochlorite 6% does Alliance Chemical offer?

Alliance Chemical lists Sodium Hypochlorite 6% in Technical Grade with a concentration or assay of 6%. Check the product specification for the measurement basis and acceptance limits. A grade label alone does not establish certification or suitability for a regulated application. For batch results, request a COA using the product name and lot number.

What are common industrial applications of Sodium Hypochlorite 6%?

Catalog industry categories for Sodium Hypochlorite 6% include Water & Environmental. To evaluate it for your process, compare the listed grade, concentration and product specifications with your requirements. Contact Alliance Chemical to confirm any application-specific documentation or certification before ordering.

What are the hazards of Sodium Hypochlorite 6% and where do I find handling guidance?

Per its GHS classification (SDS Section 2), Sodium Hypochlorite 6% carries the signal word Danger and the following hazard statements: H290 MAY BE CORROSIVE TO METALS; H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE; H400 VERY TOXIC TO AQUATIC LIFE; H410 VERY TOXIC TO AQUATIC LIFE WITH LONG LASTING EFFECTS; EUH031. Product-specific first aid, fire-fighting, spill response, handling, storage, exposure controls/PPE, and disposal guidance are in SDS Sections 4-8 and 13 — always consult the SDS before use. Download the SDS.

What is the DOT shipping classification for Sodium Hypochlorite 6%?

The catalog transport entry lists UN1791, hazard class 8, packing group III. Consult SDS Section 14 and confirm the requirements for your selected pack size and shipping destination with Alliance Chemical.

How must Sodium Hypochlorite 6% waste be disposed?

Consult SDS Section 13 for disposal information for Sodium Hypochlorite 6%. Disposal requirements depend on the resulting waste, contamination and location. Have your site's responsible waste professional determine the appropriate waste classification and disposal method. View the SDS.

Does Alliance Chemical provide an SDS and COA for Sodium Hypochlorite 6%?

Search the document library for Sodium Hypochlorite 6%. The SDS is also available here. A sample COA describes specifications and does not establish the results for your shipment. To request a lot-specific COA or confirm document availability, contact Alliance Chemical with the product name and lot number.