Product Overview
Hydrogen Peroxide 6% ACS Grade is an aqueous, stabilized oxidizer solution supplied to ACS reagent specifications. It is a colorless liquid with a slightly sharp odor, and it serves buyers who need a controlled, documented oxidant at a strength that is easy to handle: analytical labs running titrations, water-treatment operators dosing against organic contaminants, and textile and pulp operations running bleach steps. we distribute it, pack it, and ship it daily from our warehouse in Taylor, TX, and every lot goes out with the paperwork a QC lead needs to accept it on the dock.
ACS Grade matters when your process or your customer audit requires reagent-level purity with documentation behind it. If you are cleaning equipment or running a general-purpose oxidation step where reagent certification adds cost without value, the sibling Hydrogen Peroxide 6% Technical Grade covers the same concentration at a working-grade spec.
Why This Concentration
Six percent sits in a practical middle ground on the peroxide ladder. It delivers noticeably more oxidizing capacity per gallon than household-strength material, yet it remains far easier to store, meter, and ship than concentrated solutions. For most bench work — titrations, surface decontamination, small-batch oxidation — 6% gives you enough active oxygen without the aggressive decomposition behavior and storage discipline that higher strengths demand.
Pick your strength by the job, not by habit. If your method calls for a milder solution, step down to Hydrogen Peroxide 5% ACS Grade or the economical Hydrogen Peroxide 3% Technical Grade. If you are diluting on site or need more punch per dose, move up to Hydrogen Peroxide 10% ACS Grade, Hydrogen Peroxide 12% ACS Grade, or the lab-standard Hydrogen Peroxide 30% ACS Grade. A useful rule from the shipping floor: buy the lowest concentration that does the work. Excess strength buys you nothing but handling risk and stricter storage.
Chemical Profile
Hydrogen peroxide carries the formula H2O2, CAS number 7722-84-1, and a molecular weight of 34.015. This product is a clear, colorless aqueous liquid with a slightly sharp odor. At 6% w/w the solution has a density of 1.02 at 20 °C — close enough to water that standard metering pumps and gravity-feed setups need no special adjustment. It is fully miscible in practice, with published solubility of at least 100 mg/mL at 72 °F, and it shows a low vapor pressure of 1 mmHg at 59.5 °F, so open-container vapor loss is modest at room temperature. The solution is stabilized against decomposition, but like all peroxide it slowly liberates oxygen over time, which is why we ship it in vented, peroxide-compatible packaging and why you should keep it out of direct sun.
Industrial Applications
The value of hydrogen peroxide is simple: it is a strong oxidizer whose only breakdown products are water and oxygen. That clean decomposition is why it appears across so many industries.
-
Oxidizing agent: Drives oxidation reactions in chemical processing where a residue-free oxidant is required. When the reaction is done, there is no chloride, sulfate, or metal left behind to purge.
-
Water treatment: Dosed to control organic contaminants and odor-causing compounds in process and wastewater streams. Operators favor peroxide because overdose does not add dissolved solids to the discharge.
-
Analytical reagent: Used in titrations and sample-preparation procedures where ACS-grade purity keeps trace impurities from skewing results. This is the use case that justifies the ACS certificate.
-
Textile and pulp bleaching: Whitens fabrics and wood pulp through oxidative bleaching, an alternative to chlorine-based chemistry where effluent restrictions apply.
-
Laboratory surface decontamination: Applied to clean and decontaminate benchtops, glassware, and equipment surfaces, then simply rinsed — the residue is water.
Handling & Storage
This product carries the signal word Warning with hazard statement H319, Causes serious eye irritation (per the product's GHS classification). Splash-rated goggles are the non-negotiable PPE for this material; add chemical-resistant gloves for routine transfer work and make sure the work area is ventilated.
Store it cool, dry, and out of direct sunlight — peroxide is light-sensitive, and heat accelerates decomposition. Keep it in the original HDPE container or transfer only to HDPE or glass; never decant into metal containers. Keep it physically separated from organic materials, reducing agents, and combustibles: an oxidizer stored next to its fuel is a preventable incident. Do not return unused product to the container, and never seal it in an unvented vessel — decomposition releases oxygen, and pressure has to go somewhere. Kept sealed, stabilized, and cool, this solution holds its assay well over a normal stocking cycle.
Hazmat & Shipping
Canonical transport status is not regulated. Review the current SDS and carrier requirements before shipment.
Documentation
A Safety Data Sheet ships with every order and is available in English, Spanish, French, and Japanese — useful if your EHS program serves a multilingual crew or an overseas parent company audit. A lot-specific Certificate of Analysis accompanies each shipment, tying the assay of the exact material in your container back to its production lot, and a Technical Data Sheet is available for spec review before you buy. If your quality system needs documents in advance for supplier qualification, ask — we send them same day.
Why Buy from Alliance Chemical
We are a chemical distributor and hazmat shipping operation, and this product moves through our Taylor, TX warehouse daily. That means orders placed today are picked from stock, not backordered from a third party. Your shipment arrives in compliant, peroxide-compatible packaging, packed by a team that handles oxidizers every shift, with the SDS and lot-specific COA in hand. Shipping and handling guidance on this page is reviewed by a DOT Hazmat Specialist. From single quarts for the bench to 275- and 330-gallon totes for treatment systems, you get the same documentation, the same packing discipline, and a real person on the phone in Texas if something on the dock doesn't look right.
